完美世界txt下载,大主宰之灵路天蚕土豆

Small CNC lathe normal operation need what conditions

From:Taian Haishu Machinery Co.,Ltd. Updatetime:2021-12-4 9:34:57 Views：

1, the installation location Automatic small CNC lathe should be located away from the vibration source, should avoid direct sunlight and heat radiation effects, to avoid the impact of moisture and airflow. If vibration source near the mach

Small CNC lathe normal operation need what conditions
1, the installation location Automatic small CNC lathe should be located away from the vibration source, should avoid direct sunlight and heat radiation effects, to avoid the impact of moisture and airflow. If vibration source near the machine, the machine should be set around the anti-vibration groove, otherwise it will directly affect the machining accuracy and stability, so that poor contact of electronic components, failure, affect the reliability of machine tools.
2, the ambient temperature of small automatic CNC lathe environment temperature should be less than 30 degrees, the relative temperature is less than 80%. Generally speaking, the numerical control electric control box has the exhaust fan or the air blower in the interior, maintains the electronic component, specially the central processing unit working temperature is constant or the temperature difference change is very small. Excessive temperature and humidity will result in reduced control system component life and increased failure. Increase in temperature and humidity, increased dust will produce bonding in the integrated circuit board, and lead to short circuit.
3, the power requirements of general automatic small CNC lathe installed in the machine shop not only the ambient temperature changes, the use of poor conditions, and a variety of electrical and mechanical equipment, resulting in large fluctuations in power grids, so the installation of small CNC lathe power supply voltage has strict control. Power supply voltage fluctuation must be within the allowable range, and remain relatively stable, otherwise it will affect the normal operation of CNC system.
The above content describes the normal operation of small CNC lathe what conditions are required, the main products of Tai'an sea of machinery: horizontal lathe bed CNC lathes, vertical CNC lathes, CNC turning centers, CNC lathes, CNC milling machine, CNC machining center, choose The number of seas, choose Su always feel right, order the phone 13953800780.