The working principle of the numerical control lathe feeder
From:Taian Haishu Machinery Co.,Ltd. Updatetime:2016-6-21 14:37:25 Views：
The working principle of the numerical control lathe feeder
Oil bath by hydraulic station, machine, pipe, pushing rod, bracket, control circuit of five parts, such as principle of oil pump with constant pressure supply oil to the feed tube (0.1 ~ 0.2 Mpa), push rod (pushing rod) push bar into the spindle, so also called hydraulic feeder.Bar in the feed tube while working within the hydraulic oil, when the bar stock rotation, under the oil damper for stress, bar from the material tube float, when revolutions quick bar will be automatically suspended in the middle of the feeding tube.Greatly reduce the little bar and feeding tube wall collision and friction.Vibration and noise is very small at work, especially for high speed, long bar, precision workpiece machining.Current oil bath feeder is increasingly widely used at home and abroad, can match with all kinds of machine tools used, with automatic packing machine to complete the work, after the bar automatically send, automatic machine tool is in waiting for loading condition, and through the warning device charging tells the operating personnel.
